Newly Developed Ceramics End Effector / Handling Arm ｜UniZac-Obon™
Newly Developed Ceramics End Effector / Handling Arm
UniZac-Obon™
What is UniZac-Obon™?
This is a tray-type ceramic End Effector / Handling Arm used under a vacuum condition.
Ceramic End Effector / Handling Arm is "more heat-resistant", "less deflective", and "lighter" in weight as compared to the metal ones.
-
Features
-
As necessary, it is possible to make mounting holes in any position to the length direction.
-
The position of suction port is adjustable. It can be made on the front or back side as long as it is on the center line.
Strength - UniZac-Air is designed, with its hollow air channel built inside a single body, meaning that it is more robust than the monocoque design of the assembled plates with adhesives.
Significant cost reduction by saving T/C - Since this is a standardized product, the common type of tool is available, meaning that no tooling charge (T/C) is required, although it was conventionally required for any non-standard products.
-
-
Drawing for 8 inch Wafer
Drawing for 12 inch Wafer
Price |
Leadtime | |
|---|---|---|
SUS-adhered common types that are widely availble |
1 | 1.5 months after receiving a firm order. |
| UniZac-Obon™ | 0.6* | *5 days after receiving a firm order. |
* Price & Leadtime: Possible only when no additional processing is required other than the width of the root, length and holes.
Contact Us
Customizable from single quantity orders.
Please feel free to contact us.
-
ASUZAC Inc.
Fine Ceramics DivisionOpening hours：9:00～17:00（Sat, Sun closed）
FAX : +81-26-251-2160
Product Search
-
- Chamber Components
-
- Wafer Hands
-
- Porous Chucks
-
- Large Parts for Display Manufacturing Equipment
-
- Setters
-
- Substrates
-
- Crucibles
-
- Trays